
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ASJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ASJNWT is a compact filter & regulator from AirTAC, combining air filtration and pressure regulation in a single body. This 1/4in unit handles 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles. Its diversion structure spins incoming air to separate liquid water and solid debris into the 25 cc drain bowl.
This model ships without a gauge, so the 1/8in gauge connection is ready for a separate unit if needed. The automatic drain clears condensate without manual intervention, making it suitable for hard-to-reach installations. At 290 g, it is light enough for direct mounting on small jigs or single actuators. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ASJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic cylinder on a benchtop assembly jig. The 1/4in port and 5 um element keep the actuator responsive without clogging.
Use with a pressure gauge added to the 1/8in connection for a compact instrument-air feed. The fine element protects sensitive pneumatic controls.
Mount on a small cart feeding a pneumatic screwdriver or spray gun. The automatic drain suits intermittent use where manual draining is inconvenient.
Choose the GAFR200 body for small machines with 1/4in ports. It offers a 2000 L/min flow envelope at 0.7 MPa inlet, which is a sizing guide rather than a rated capacity. The PC bowl is the standard choice, while C (metal) or N (nylon) options are available on other models. This unit has an automatic drain (A), no bracket (J), and no gauge (N). The 5 um element (W) suits precision valves or instrument air. Thread is NPT with MPa/psi gauge scale. For lines needing oil downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g. It has a 5 um element and automatic drain.
The N code means no gauge is fitted. The 1/8in gauge connection is left open, so you can add a gauge with the scale that matches your operators' preference. This saves cost when a panel already has a master gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.