
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ASJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ASJNWTK is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/4in porting, delivers a standard 0.15-0.9 MPa (20-130 psi) range, and uses a 5 um element for finer particle removal.
This compact 290 g unit features an automatic drain and a 25 cc condensate bowl, making it suitable for tight spaces on small machines. The pressed-in, self-locking knob maintains the set pressure even when the machine vibrates, keeping the outlet stable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ASJNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp on an assembly fixture. The 5 um element protects the tiny valve pilot from fine dust, and the automatic drain keeps the bowl from filling during a shift.
Regulate the force of a small arbor press. The self-locking knob holds the set pressure despite the vibration from each stroke, so parts come out consistent.
Supply clean, regulated air to a test rig or a single instrument. The 5 um element and the stable regulator output suit sensitive measurement tasks.
Choose this GAFR200 for small jigs or single actuators where 1/4in ports and a 290 g footprint fit. The PC bowl suits general dry indoor use, while the automatic drain handles wet lines without manual attention. This model omits the bracket (J) for panel mounting, has no gauge (N), and uses a 5 um element for finer filtration. The NPT thread and the fitted reverse-flow valve (K) complete the specification. If you need lubrication downstream, order the matching GAFC200-08 combination instead. Remember that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 1/4in port, a 0.15-0.9 MPa (20-130 psi) working range, a 1.0 MPa (145 psi) maximum, and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g.
The N code means no gauge is supplied; the 1/8in gauge connection is there if you add one later. The J code omits the mounting bracket for installations that use a panel mount or an existing bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.