
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ASNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ASNTK is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure via a balanced, self-locking regulator. This model has a 1/4in port, a 0.15-0.9 MPa (20-130 psi) working range, and a 40 um element.
A 25 cc condensate bowl collects the separated water and debris, and the automatic drain clears it without manual intervention. The unit weighs 290 g, making it a compact choice for tight spaces. A reverse-flow (reflux) valve is fitted, and no gauge is supplied; the 1/8in gauge connection is available if you add one later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ASNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture on an assembly bench. The compact 290 g body mounts directly to the frame, and the automatic drain keeps the line clear during long production runs.
Protect a small air tool or a spray gun from water and particles. The 40 um element traps solid debris, while the regulator holds a steady pressure for consistent tool operation.
Provide clean, regulated air to a single laboratory device or test rig. The 25 cc bowl is easy to inspect, and the automatic drain prevents water carryover into sensitive equipment.
Choose the GAFR200 body for small jigs or single actuators where space is limited; its 2000 L/min flow envelope at 0.7 MPa inlet suits light-duty lines. The PC bowl is the standard build, and the automatic drain handles wet or unattended lines without manual checks. The standard pressure type covers 0.15-0.9 MPa (20-130 psi), and the mounting bracket is included for panel installation. The 40 um element handles general workshop air, while the NPT thread matches common local fittings. The reflux valve is an ordering difference only. If you need lubrication downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g. It has a 1/4in port and a 40 um element.
The K indicates a reverse-flow (reflux) valve is fitted. This is an ordering difference from the standard unit. The catalogue does not detail its function in our data, so confirm the operating principle from the full AirTAC datasheet if it matters for your circuit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.