
The AirTAC GAFR Adjustable Filter Regulator GAFR20008ASNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008ASNWT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/4" ports and delivers a standard pressure range of 0.15-0.9 MPa (20-130 psi), with a 5 um element for finer filtration.
This compact 290 g unit features an automatic drain that clears condensate without manual intervention, making it suitable for wet or unattended lines. The PC bowl provides visibility of collected water and solids, while the integrated mounting bracket simplifies installation on panels or frames. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008ASNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic jig or clamping fixture with clean, regulated air. The 5 um element protects precision valves from fine particulates that could cause sticking or wear.
Supply a stable 0.15-0.9 MPa output to bench-mounted test equipment. The automatic drain keeps the bowl clear during extended testing sessions without operator attention.
Integrate into tight control cabinets or small machine frames where space is limited. The 290 g weight and included bracket allow secure mounting without additional support structures.
Choose this GAFR200 when your application needs 1/4" ports and a compact footprint. The 5 um element traps finer particles than the standard 40 um, ideal for precision valves or instrument air, though it will require more frequent service. The automatic drain (A) suits unattended operation, while the included bracket (blank) allows direct mounting. The missing gauge (N) means you cannot read outlet pressure without adding one; the 1/8" gauge connection is ready for a field-installed unit. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If oil is needed downstream, order the matching GAFC200-08 combination instead. Remember that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near 1.0 MPa for maximum output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the unit weighs 290 g. It features a 5 um filter element and an automatic drain.
The N code after the port indicates no gauge is supplied. This saves cost when remote monitoring is used or when a panel-mounted gauge is preferred. If you add one later, the gauge connection is 1/8" and the NPT thread scale reads MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.