
The AirTAC GAFR Adjustable Filter Regulator GAFR20008LNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008LNWTK is a filter and regulator combined into a single compact body, saving valuable rail space compared to separate units. It handles a 1/4in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a fine 5 um element for precision applications.
This unit weighs only 290 g and includes a 25 cc condensate bowl. The reverse-flow (reflux) valve is fitted as an ordering difference, and the mounting bracket comes included. No gauge is supplied, but the 1/8in gauge connection is ready for one if you need to read the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008LNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small instrument air circuit that needs a stable, low pressure supply. The 5 um element protects fine internals from particle wear.
Power a small bench press or a manual assembly fixture where a compact filter-regulator keeps the air clean and set to a gentle 0.15-0.4 MPa for delicate operations.
Supply a lab bench or test rig with filtered air at a controlled low pressure. The 25 cc bowl is easy to check, and the semi-auto drain keeps the line clear.
Choose the GAFR200 body for small jigs or single actuators where space is tight and flow demand is modest, with its flow curve plotted to 2000 L/min at 0.7 MPa inlet. The PC bowl suits standard shop environments, while the 5 um element traps finer particles than the standard 40 um for sensitive valves or instruments. This model ships with both semi-auto and manual drains, so you can drain manually or let it purge automatically when pressure drops. The L-type regulator tops out at 0.4 MPa, so confirm your system never needs more than that. The bracket is included for panel mounting, and the NPT thread matches common local fittings. If you need lubrication downstream, order the matching GAFC200-08 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, giving you comfortable inlet margin for stable regulation.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008LNWTK is a filter & regulator with a 1/4in port, working pressure range of 0.15-0.4 MPa (20-58 psi), max pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and temperature range of -5 to 70 C. It has a 25 cc drain bowl, weighs 290 g, and comes with a 5 um element.
The K code indicates a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference that adds the valve to the assembly. The function is detailed in the catalogue pages not included in our data, so we recommend confirming the application details with the datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.