
The AirTAC GAFR Adjustable Filter Regulator GAFR20008LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008LWT is a filter and regulator combined into one compact body, so it cleans the air and stabilizes the outlet pressure without needing separate units. This 1/4in version uses a 5 um element to trap fine particles, and its lower-pressure range of 0.15-0.4 MPa (20-58 psi) suits delicate circuits.
Its single 25 cc condensate bowl collects water and solids spun out by the diversion structure, and the pressed-in self-locking knob keeps the set pressure stable against vibration. Weighing just 290 g, it is the lightest body in the GAFR family, designed for small jigs or single actuators. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008LWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small instrument air circuit that needs a stable low pressure. The 5 um element keeps fine particles away from sensitive internals.
Mount this 290 g unit on a workbench to supply a clamping jig or a small fixture. The included bracket simplifies panel mounting, and the compact body saves rail space.
Use the lower-pressure range to regulate air for a lab test rig or a prototype station. The 25 cc bowl is easy to check, and the manual drain gives you control over purging.
Choose the GAFR200 body for 1/8in or 1/4in ports; this model uses the 1/4in port and is the entry point of the series. The PC bowl is the standard build, while the 5 um element filters finer than the 40 um default, making it a good fit for precision valves or instrument air. It ships with both semi-auto and manual drains, and the mounting bracket is included for panel installation.
Since this is an L-type, the regulated range tops out at 0.4 MPa, so confirm your circuit never needs more than that. The fitted gauge reads in MPa/psi, and the thread is NPT. If you need lubrication downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008LWT is a filter & regulator with a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um filter element. Maximum pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. The condensate bowl holds 25 cc, and the unit weighs 290 g.
The L in the code indicates the lower-pressure type, which regulates from 0.15 to 0.4 MPa instead of the standard 0.15 to 0.9 MPa. This is designed for applications that need a gentle, consistent low pressure, such as delicate actuators or precision air tools. If your circuit might require more than 0.4 MPa, the standard S-type would be a better choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.