
The AirTAC GAFR Adjustable Filter Regulator GAFR20008SJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008SJNTK is a filter and regulator combined into one compact body, handling both filtration and pressure control without needing separate units. It serves a 1/4in port with a 0.15-0.9 MPa (20-130 psi) working range and a 40 um element, while the 25 cc condensate bowl collects separated water and solids.
This model ships without a mounting bracket and without a gauge, though the 1/8in gauge connection is ready for a later addition. The reverse-flow valve is fitted as an ordering difference, and the semi-auto plus manual drain gives operators both automatic purging and a manual override option. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008SJNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed one pneumatic cylinder or a small indexing table with clean, regulated air at up to 0.9 MPa. The 25 cc bowl handles light condensate from a single device.
Supply a hand press or a small clamping fixture on a workbench. The compact 290 g body mounts easily on a panel or frame without taking up much rail space.
Use this unit on a test rig where a 1/4in line feeds a pressure-sensitive valve. The 40 um element protects the valve, and the manual drain lets you inspect collected water.
Choose the GAFR200 for small jigs or single actuators where a 1/4in port and 290 g weight suit light-duty lines. The PC bowl handles standard shop air, while the semi-auto+manual drain provides flexibility for periodic checks. This J version omits the bracket for panel mounting, and the N code means no gauge is included, so plan to add one via the 1/8in connection if you need to read set pressure. The 40 um element covers general filtration, and the NPT thread matches common local fittings. If oil is needed downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The N code means no gauge is fitted, leaving a 1/8in connection for a later addition. The J code omits the mounting bracket, so you can use an existing panel mount or custom bracket. The reverse-flow valve is included as the K code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.