
The AirTAC GAFR Adjustable Filter Regulator GAFR20008SJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008SJNWT is a genuine AirTAC filter & regulator with both functions housed in a single body, so it replaces a separate filter and regulator with one compact unit that has fewer potential leak points. It handles a 1/4in port and delivers a regulated output of 0.15-0.9 MPa (20-130 psi) with a 5 um element for finer particle removal.
This model comes with a PC bowl, a semi-auto plus manual drain, and no mounting bracket or gauge included. The unit weighs 290 g and its flow curve is plotted to 2000 L/min at 0.7 MPa inlet, which serves as a sizing envelope rather than a rated capacity. The gauge connection is 1/8in if you add one later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008SJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small instrument-air circuit where the 5 um element protects sensitive internals from fine particulates.
Supply a compact bench jig or a single-acting actuator that needs a stable 0.15-0.9 MPa supply and a 1/4in port connection.
Use on a small test rig where the 25 cc drain bowl is adequate for short runs and the 290 g mass is easy to panel-mount.
Choose this GAFR200 for small jigs or single actuators where a 1/4in port and a 25 cc drain bowl suit the duty cycle. The PC bowl is the standard build choice, while the semi-auto plus manual drain gives you both automatic condensate release and a manual override. The 5 um element traps finer particles than the standard 40 um, making it a better fit for precision valves or instrument air, though it will need more frequent element service. The J code means no bracket is supplied, so plan for a panel mount or an existing bracket, and the N code means no gauge is fitted, so you will need to add one to read the set pressure. If your line needs lubrication downstream, order the matching GAFC200-08 combination instead. Since the maximum supply pressure of 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the regulated range, plan your inlet pressure near 1.0 MPa if you intend to run at the upper end.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR20008SJNWT is a filter & regulator with a 1/4in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the unit weighs 290 g. It has a 5 um element, a PC bowl, a semi-auto plus manual drain, and no gauge or bracket.
The N code after the port means no gauge is supplied, so you cannot read the set pressure without adding one; the 1/8in gauge connection is ready for a gauge. The J code means the mounting bracket is omitted, which suits installations where you have an existing bracket or a panel-mount arrangement. Both options reduce the initial cost if you already have these accessories.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.