
The AirTAC GAFR Adjustable Filter Regulator GAFR20008SNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20008SNWTK is a filter and pressure regulator combined in a single body, saving rail space compared to separate GAF and GAR units. It delivers air filtered to 5 um and regulated from 0.15-0.9 MPa (20-130 psi) through a 1/4in port, with a 25 cc condensate bowl and a 290 g mass that suits small jigs or single actuators.
This model ships with the mounting bracket and a semi-auto drain plus manual drain, but no gauge; the 1/8in gauge connection is ready if you add one later. The pressed-in self-locking knob resists set-pressure drift from vibration, and a reverse-flow (reflux) valve is fitted as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20008SNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed one pneumatic cylinder or a small indexing table with clean, regulated air at up to 0.9 MPa. The 5 um element protects fine valve internals.
Supply a workshop air drill or screwdriver on a workbench, where the compact 290 g body mounts easily and the self-locking knob holds the setpoint.
Use ahead of a sensitive pressure sensor or flow meter that needs 5 um filtration and a stable supply pressure without a large footprint.
Choose the GAFR200 body for 1/4in ports and light-duty circuits; if you need more flow, step up to the GAFR300 with its 3500 L/min envelope at 0.7 MPa inlet. The PC bowl suits standard shop air, while the 5 um element traps finer particles for precision valves. The semi-auto drain releases condensate automatically when pressure drops, with a manual backup; the included bracket simplifies mounting. Since the gauge is omitted, plan to add one via the 1/8in connection if you need to read set pressure. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The N code means no gauge is supplied; the 1/8in gauge connection is available if you add one. The K code indicates a reverse-flow (reflux) valve is fitted, which is an ordering difference from standard models.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.