
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ALJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08ALJNWT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. This 1/4in version handles a lower pressure band of 0.15-0.4 MPa (20-58 psi) and uses a 5 um element for finer particle removal.
Its metal bowl and automatic drain make it suited for applications where condensate must be expelled without manual attention. Weighing 290 g, this compact unit fits neatly into small machine builds, though the lack of a bracket means you will need an existing panel mount or frame support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ALJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or small actuator that requires a steady, lower pressure supply. The 5 um element protects sensitive internal components from fine particulate wear.
Integrate into a tight control cabinet or on a small assembly station where space is at a premium. The combined body reduces the footprint compared to separate filter and regulator units.
Use on a lightly used line in a warm, humid plant where the automatic drain reliably expels collected water without requiring an operator to manually open a valve.
Choose the GAFR200 body for small actuators or jigs; if you need higher flow, step up to the GAFR300 which has a 60 cc bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) offers a robust build choice, but confirm compatibility with aggressive surroundings as no chemical resistance data is printed. This model has an automatic drain (A) for wet or unattended lines, a 5 um element (W) for finer filtration, and no gauge (N) - the 1/8in gauge connection is there if you add one later. The lower pressure type (L) tops out at 0.4 MPa, so if your machine may ever need more, select a standard S type instead. With no bracket (J), plan for a panel mount. If oil is needed downstream, order the matching GAFC200-08 combination instead. Note that the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, giving you ample inlet pressure to work with.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C (must not freeze). The metal drain bowl holds 25 cc, and the total unit weight is 290 g.
The 'N' code means no pressure gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. The 'J' code means the mounting bracket is omitted, so you must use an existing bracket or a panel mount to secure the 290 g unit; do not support it from the tubing alone.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.