
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ALJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08ALJT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port with a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and the 40 um element traps solid particles while the diversion structure spins out liquid water.
This unit weighs 290 g and has a 25 cc metal condensate bowl with an automatic drain, making it suitable for compact machines where frequent manual draining is impractical. The pressed-in self-locking knob resists vibration-induced drift, helping maintain the set pressure in applications with mechanical shaking. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ALJT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or positioning cylinder on a benchtop assembly station where space is tight and the lower pressure range protects delicate workpieces.
Supply regulated air to a portable leak-testing setup that moves between workstations, where the metal bowl resists impacts and the automatic drain handles condensation without attention.
Provide clean, regulated air at low pressure to a lab instrument or small pneumatic actuator, with the 40 um element filtering particles and the gauge confirming output.
Choose the GAFR200 body for small jigs or single actuators with 1/4in connections, where its 2000 L/min flow envelope at 0.7 MPa inlet provides ample capacity. The metal bowl suits demanding environments, though verify compatibility for aggressive surroundings. The automatic drain handles wet lines without operator intervention, while the L-type regulation tops out at 0.4 MPa - confirm your system never needs more. No bracket is included, so plan for panel mounting or existing support. The fitted gauge reads MPa/psi. If downstream lubrication is needed, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, pressure range 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 25 cc drain bowl, and weighs 290 g.
The A code specifies an automatic drain that expels condensate without manual intervention, ideal for wet lines or unattended operation. The J code omits the mounting bracket, so you must provide panel mounting or use an existing bracket. This combination suits installations where the unit is integrated into a machine frame.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.