
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ALJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR200C08ALJWTK is a filter and regulator combined into a single body, so the incoming air is spun to separate liquid water and solid particles before a balanced regulator sets a steady outlet pressure. It is a compact 1/4in unit rated for 0.15-0.4 MPa (20-58 psi) with a 5 um element, and it has no lubricator - the only bowl is the 25 cc metal condensate bowl.
The pressed-in self-locking knob resists set-pressure drift from vibration, and the circular gauge with clip and magnifier saves panel space. At 290 g, this size class suits small jigs or single actuators; the metal bowl and automatic drain make it a fit-and-forget choice for wet or unattended lines. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ALJWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or small instrument air circuit that needs clean, regulated air at a stable lower pressure, with the 5 um element protecting sensitive internals.
Mount on a bench or small panel to supply a manual assembly jig or clamping fixture, where the compact 290 g body and 1/4in port fit tight spaces.
Use on a machine line with frequent condensate where the automatic drain and metal bowl handle moisture without manual draining, reducing maintenance visits.
Choose this GAFR200 when your line needs 1/4in ports and a lower 0.15-0.4 MPa regulated band - the L type tops out well below the Standard 0.9 MPa ceiling, so confirm the machine never needs more. The metal bowl (C) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon; the automatic drain (A) clears condensate without manual attention, and the 5 um element traps finer particles for precision valves. No bracket is included (J), so plan a panel mount or existing support; the fitted gauge reads MPa/psi on the NPT thread, and the reverse-flow (reflux) valve is attached as an ordering difference. If oil is needed downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, the unit weighs 290 g, and the flow curve is plotted to 2000 L/min at 0.7 MPa inlet.
The metal bowl (C) is a build choice with the same pressure and temperature ratings as PC or nylon - confirm compatibility for aggressive surroundings. The J code means no mounting bracket is included, so you need a panel mount or existing bracket. This model also has an automatic drain (A) and a 5 um element (W) for finer filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.