
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR200C08ALNWTK is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port size with a lower pressure range of 0.15-0.4 MPa (20-58 psi) and uses a 5 um filter element for finer particle removal.
The metal bowl (25 cc) protects the condensate collection area, and the automatic drain clears water without manual intervention. A reverse-flow valve is fitted as an ordering option. This unit does not lubricate; for oil downstream, the matching GAFC200-08 combination adds that function. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ALNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or small positioning table where stable low pressure prevents part damage.
Provide filtered, regulated air to a benchtop instrument that needs fine particle removal and a soft pressure ceiling.
Power a small air tool or cleaning nozzle with consistent pressure and automatic water removal in a workshop.
Choose the GAFR200 body for small jigs or single actuators where space is tight; its 2000 L/min flow envelope (at 0.7 MPa inlet) suits light duty. The metal bowl is a build choice, not a performance upgrade, and the automatic drain suits unattended lines. The 5 um element traps finer particles than the standard 40 um, but requires more frequent service. The L-type regulator tops out at 0.4 MPa, so confirm your machine never needs more. The bracket is included, and no gauge is fitted; the 1/8in gauge connection is ready if you add one. The NPT thread matches common local fittings. Since a reflux valve is fitted, note it as a specified option. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 1/4in port, working range 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 25 cc metal drain bowl, and 290 g weight.
The L code designates a lower-pressure regulator, capped at 0.4 MPa (58 psi) instead of the standard 0.9 MPa. This suits delicate applications but is wrong if your line may ever need more than 0.4 MPa.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.