verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR200 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK

The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ASJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • Bowl materialMetal
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight290 g
$58.26 $65.76Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR200-08 bowl, gauge and thread option on one page All GAFR200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK

The GAFR200C08ASJTK is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing two separate components. This 1/4in unit carries a metal bowl and a 40 um element, and it operates across 0.15-0.9 MPa (20-130 psi).

The metal bowl holds 25 cc of condensate, and the automatic drain clears it without manual attention. At 290 g, this is the lightest body in the GAFR range, making it a compact fit for small machines or single actuators. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK
SeriesGAFR200 filter & regulator
Port size1/4" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialMetal
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
BracketNot included (J)
Weight290 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK

GAFR200GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
JNo bracket (J) — supplied without the mounting bracket.
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR200 · 1/4" · curve to 2000 L/min
One size upGAFR300 (curve to 3500 L/min)
Add a lubricatorGAFC200-08 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK Is Used

precision_manufacturing

Small jig or fixture

Feed a single pneumatic clamp or a small indexing fixture with clean, regulated air at a consistent pressure.

engineering

Bench test setup

Supply a lab bench or test rig where a compact unit with a metal bowl and automatic drain reduces maintenance.

handyman

Light assembly line

Protect a small air tool or a single cylinder on a light assembly station from water and particles.

Is the Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK the Right Air-Prep Unit?

Choose the GAFR200 body when your line is 1/4in and your flow demand stays within the plotted 2000 L/min at 0.7 MPa inlet envelope. The metal bowl suits environments where a polycarbonate bowl might be questioned, though the -5 to 70 C and 1.0 MPa (145 psi) maximum ratings are identical across bowl materials. The automatic drain handles wet or unattended lines, while the J code means no mounting bracket is included, so plan for a panel mount or an existing bracket. The fitted gauge reads in MPa/psi because the thread is NPT, and the K code adds the reverse-flow valve as an ordering difference. If lubrication is needed downstream, order the matching GAFC200-08 combination instead. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 290 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK FAQ

It is a filter and regulator in one body with a 1/4in port. The pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. The metal drain bowl holds 25 cc, and the unit weighs 290 g.

The K code indicates the reverse-flow (reflux) valve is fitted. It is an ordering difference from models without the K code; the catalogue does not detail its function.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200C08ASJTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR200C08ASJTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.