
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ASNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08ASNTK is a filter and regulator combined into a single body, handling both air purification and pressure control in one compact unit. This 1/4in port model weighs just 290 g, making it a lightweight choice for tight spaces on small machines or individual actuators.
It delivers a standard pressure range of 0.15-0.9 MPa (20-130 psi) and uses a 40 um filter element. The metal bowl and automatic drain mean it is ready for continuous operation, while the reverse-flow valve is fitted as an ordering difference. No gauge is included, but the 1/8in gauge connection is ready for one if you need to read the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ASNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic jig or fixture on an assembly bench with clean, regulated air at 0.15-0.9 MPa. The compact 290 g body mounts directly on the machine frame.
Power a benchtop press or small air tool that needs steady pressure. The automatic drain keeps the 25 cc metal bowl from overflowing during extended use.
Provide filtered air to a lab fixture or test rig that requires a stable supply pressure. The 40 um element protects sensitive components from particles.
Choose the GAFR200 body for small jigs or single cylinders where a 1/4in port and 25 cc drain bowl are sufficient. The metal bowl is a build choice; the common 1.0 MPa max pressure and -5 to 70 C temperature range apply to all bowl materials, so confirm compatibility with your environment. This model has an automatic drain for wet or unattended lines, a 40 um element for general use, and the mounting bracket is included. The NPT thread gives an MPa/psi gauge scale, and the K code means a reverse-flow valve is attached. If you need lubrication downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200C08ASNTK is a filter & regulator with a 1/4in port, working pressure range of 0.15-0.9 MPa (20-130 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates in -5 to 70 C temperatures, has a 25 cc drain bowl, and weighs 290 g. The element is 40 um and the drain is automatic.
The K code indicates that a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference from models without the K code. The specific function is detailed in the catalogue page not included in our data, so we recommend confirming the details from the official AirTAC datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.