
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08ASWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08ASWTK is a genuine AirTAC filter & regulator, combining air filtration and pressure regulation in a single body. This 1/4" port unit weighs 290 g and operates from 0.15 to 0.9 MPa (20-130 psi), with a 5 um filter element. It has a metal bowl and an automatic drain, making it suitable for compact machine builds.
This model includes a circular gauge with an MPa/psi scale and a mounting bracket. The pressed-in self-locking knob resists set-pressure drift from vibration, keeping your outlet pressure stable. A reverse-flow (reflux) valve is fitted, and the unit is rated for -5 to 70 C, so it must not be used in freezing conditions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08ASWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small indexing table with 5 um filtered air, holding a stable set pressure for consistent actuation.
Mount this 290 g unit on a small assembly station or test rig where space is tight and a separate filter plus regulator would not fit.
Use the automatic drain on a lightly used secondary line where manual draining would be forgotten, keeping condensate out of downstream components.
Choose this GAFR200 for small jigs or single actuators needing clean, regulated air at 1/4" ports. The metal bowl is a build choice; the common 1.0 MPa (145 psi) maximum applies to all bowl materials, so confirm compatibility for aggressive surroundings. The automatic drain suits unattended or wet lines, while the included bracket simplifies mounting. The 5 um element traps finer particles than the standard 40 um, ideal for precision valves, though it requires more frequent service. The NPT thread gives an MPa/psi gauge scale, and the fitted reflux valve is an ordering difference only. If you need lubrication downstream, order the matching GAFC200-08 combination instead. For this unit, 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The operating temperature range is -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g.
The K code indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference; the catalogue defers its function to a separate page, so no operational details are provided here.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.