
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LJNT is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This 1/4in version uses a metal bowl and a 40 um element, with a lower-pressure range of 0.15-0.4 MPa (20-58 psi) suited to gentle, consistent pneumatic tasks.
Because the filter and regulator share one housing, there are fewer joints to seal and less rail space consumed than with a separate GAF filter plus GAR regulator. The metal bowl is a build choice for the condensate collection area; the common 1.0 MPa (145 psi) maximum and -5 to 70 C temperature limits apply unchanged. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LJNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a small pneumatic clamp or fixture on an assembly bench where a steady 0.15-0.4 MPa supply keeps delicate parts held without excessive force.
Supply a compact air tool or blow gun station where the lower pressure range protects sensitive components and the metal bowl resists rough workshop handling.
Use on a test rig or prototype setup where the 1/4in port and 290 g body mount easily on a small panel, and the semi-auto drain allows quick manual checks.
Choose the GAFR200 body for small jigs or single actuators where a 1/4in port and a 290 g unit fit neatly. The metal bowl (C) is specified here; the 25 cc drain bowl collects condensate and is emptied via the semi-auto and manual drains that are both fitted. This L-type is capped at 0.4 MPa, so if the machine may ever need more pressure, select the standard S type instead. No bracket (J) is included, meaning you must provide a panel mount or existing bracket; the gauge is omitted (N), but the 1/8in gauge connection is ready if you add one later. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For lines that need oil downstream, order the matching GAFC200-08 combination rather than this unit. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this range, so plan the inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Pressure range is 0.15-0.4 MPa (20-58 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Operating temperature is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g with a 1/4in port and 40 um element.
The J code means the mounting bracket is omitted, so you must use a panel mount or an existing bracket. The N code after the port means no gauge is supplied, but the 1/8in gauge connection is present if you add one later. Both options reduce the initial cost when you already have these accessories.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.