
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LJNWTK is a filter and regulator combined in a single body, with no lubricator section. It handles 1/4in ports and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), using a 5 um element for fine filtration.
This metal-bowl version weighs 290 g and has a 25 cc condensate bowl. The unit includes a reverse-flow valve and omits the gauge and bracket, with the 1/8in gauge connection available if a gauge is added later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LJNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with clean, regulated air at low pressure, using the 5 um element to protect sensitive valve pilots.
Supply a hand-held screwdriver or small cylinder on a bench line where space is tight and the 290 g body can be panel-mounted without a bracket.
Provide stable low-pressure air to a laboratory instrument that needs fine filtration and a regulated output below 0.4 MPa.
Choose this GAFR200 for small jigs or single actuators needing fine filtration and regulated pressure below 0.4 MPa. The metal bowl suits demanding environments, while the 5 um element captures finer particles than the standard 40 um grade. This model ships without a bracket and without a gauge, so plan for panel mounting and add a gauge via the 1/8in connection if needed. The semi-auto plus manual drain requires periodic attention, and the NPT thread matches MPa/psi gauge scales. For lines needing oil downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated ceiling.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
It is a filter & regulator with 1/4in ports, a lower pressure range of 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), and temperature range -5 to 70 C. The metal drain bowl holds 25 cc and the unit weighs 290 g.
The K code adds a reverse-flow (reflux) valve as an ordering option; its function is detailed in the catalogue. The N code means no gauge is supplied, leaving a 1/8in connection for adding one. This model also omits the bracket (J) and uses a 5 um element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.