
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LJT is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate units. This model uses a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 40 um element, with a metal condensate bowl and a fitted gauge reading MPa/psi.
The diversion structure spins the air to separate liquid water and solid particles into the 25 cc drain bowl, which has both semi-auto and manual drain options fitted. At 290 g, this compact unit suits small jigs or single actuators, and the pressed-in self-locking knob resists set-pressure drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LJT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or a small indexing jig on a benchtop assembly station, where the 1/4in port and compact 290 g body fit tight spaces.
Provide filtered, regulated air at up to 0.4 MPa to a laboratory test fixture or a small pneumatic cylinder used in controlled experiments.
Mount on a service cart to supply clean, regulated air to handheld pneumatic tools or blow-off nozzles during equipment maintenance rounds.
Choose the GAFR200 body for small-bore lines up to 1/4in, where the 2000 L/min flow envelope at 0.7 MPa inlet is plenty for one actuator or a small jig. The metal bowl (C) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon, so confirm compatibility for aggressive surroundings. The L type caps at 0.4 MPa, so if the machine may ever need more, select the standard S type instead. The J code omits the mounting bracket, so plan for a panel mount or an existing bracket, and the fitted gauge shows MPa/psi on the NPT thread. The semi-auto plus manual drain handles normal condensate, while the A code switches to automatic for wet lines. If lubrication is needed downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200C08LJT is a filter & regulator with a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. It has a 25 cc drain bowl, weighs 290 g, and uses a 40 um element.
The L code sets the pressure range to 0.15-0.4 MPa, which suits delicate applications that must not exceed 0.4 MPa. The J code means the mounting bracket is not included, so you need a panel mount or an existing bracket. The metal bowl (C) is a build choice with the same ratings as PC or nylon.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.