
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LJWTK is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 5 um element for finer filtration.
This metal-bowl version includes a circular gauge with MPa/psi scale and a reverse-flow valve fitted. The semi-auto plus manual drain handles condensate, and the 25 cc bowl collects water and solids spun out by the diversion structure. At 290 g, it suits small jigs or single actuators where precise low-pressure control is needed. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LJWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic jig or fixture requiring stable low pressure, with the 5 um element protecting delicate valves from fine particles.
Provide filtered, regulated air to a laboratory bench setup where the lower 0.4 MPa ceiling suits sensitive instruments and the metal bowl resists frequent handling.
Mount directly on a small assembly station's panel using the existing holes, saving space with the bracket omitted and keeping the line clean with the reverse-flow valve.
Choose the GAFR200 for small machines or individual actuators needing a 1/4in port; step up to GAFR300 for 3/8in or 1/2in lines with a 60 cc bowl. The metal bowl (C) is a build choice, while the 5 um element traps finer particles than the standard 40 um for sensitive valves. This model omits the bracket (J) for panel mounting, and the lower-pressure type (L) tops out at 0.4 MPa - confirm your line never needs more. The semi-auto and manual drain both come fitted, and the NPT thread gives an MPa/psi gauge scale. If oil is needed downstream, order the matching GAFC200-08 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g. It has a 1/4in port, 5 um element, and a metal bowl.
The L type is designed for applications needing only 0.15-0.4 MPa (20-58 psi), such as light actuation. The J code omits the mounting bracket for panel-mount installations where the bracket is not needed, saving space and cost.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.