
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LNWT is a filter and pressure regulator combined in a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This unit has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um filter element for fine particle removal.
Its metal bowl holds 25 cc of condensate, and the whole assembly weighs 290 g. The integrated design reduces potential leak points compared to a separate filter plus regulator setup, making it a compact choice for tight installations. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with clean, regulated air. The 5 um element protects sensitive valves, and the compact 290 g body mounts directly on the machine frame.
Supply a bench-top pressure test rig where a stable 0.15-0.4 MPa output is required. The lower-pressure range gives fine control for delicate calibration work.
Power a small screwdriver or tightening tool on an assembly line. The metal bowl resists knocks, and the included bracket secures the unit to a panel or rail.
Choose this GAFR200 for small actuators or jigs where a 1/4in port and a 290 g body fit the layout. The metal bowl suits demanding environments, while the 5 um element traps finer particles than the standard 40 um, though it will need more frequent service. The semi-auto and manual drains are both fitted, so you can drain manually or let the semi-auto function handle it. The mounting bracket is included, and the NPT thread matches common local fittings. Since there is no gauge, the 1/8in gauge connection is available if you add one later. If your line needs oil downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200C08LNWT is a filter & regulator with a 1/4in port. Its pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The element is 5 um, and it has a semi-auto plus manual drain.
The 'L' in the code indicates the lower-pressure type, which tops out at 0.4 MPa instead of the standard 0.9 MPa. This is ideal for applications that only need low pressure and benefit from finer adjustment within that band. If your machine might need more than 0.4 MPa, the standard type would be the correct choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.