
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08LT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C08LT is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate filter and regulator units. This model has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 40 um element, with a metal bowl and a semi-auto plus manual drain.
The lower-pressure type tops out at 0.4 MPa, which suits applications that only need modest regulated pressure. Its 25 cc condensate bowl and 290 g mass make it a compact unit for tight spaces, and the circular gauge with MPa/psi scale is fitted to monitor the set pressure directly. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08LT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or small jig on an assembly bench, where the 1/4in port and 290 g mass fit neatly into a tight control cabinet.
Supply a handheld pneumatic screwdriver or small sanding tool in a workshop, with the lower pressure range protecting delicate workpieces from over-pressure.
Regulate air for a small lab fixture or test rig that runs at low pressure, where the 0.15-0.4 MPa band and 40 um filtration keep the line clean and stable.
Choose the body and port first: GAFR200 with a 1/4in port is the smallest in the series, while the GAFR300 with a 3/8in port offers a larger 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet if you need more capacity. The metal bowl here is a build choice for the environment, but the common spec of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm compatibility for aggressive surroundings. The semi-auto plus manual drain means you can empty the bowl manually or let it purge automatically when pressure drops, and the mounting bracket is included for panel or frame mounting. The 40 um element is the standard grade, while a 5 um option (W) is available for finer filtration if needed. Since this is the L type, it is capped at 0.4 MPa, so if the machine may ever need more pressure, the standard S type up to 0.9 MPa is the safer choice. If the line needs oil downstream, order the matching GAFC200-08 combination instead, as this unit does not lubricate. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200C08LT is a filter & regulator with a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a max pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. It has a 25 cc drain bowl, weighs 290 g, and comes with a 40 um element and a semi-auto plus manual drain.
The L code means the regulator is set for a lower pressure band of 0.15-0.4 MPa (20-58 psi), which is about 44% of the standard type's 0.9 MPa ceiling. This suits applications that only need modest pressure, but if the machine may ever require more, the standard S type up to 0.9 MPa is the right choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.