
The AirTAC GAFR Adjustable Filter Regulator GAFR200C08SJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR200C08SJWT is a filter and regulator combined into a single housing, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. It has a 1/4in port, a standard working range of 0.15-0.9 MPa (20-130 psi), and a 5 um element that traps finer particles than the standard 40 um grade.
The metal bowl holds 25 cc of condensate, and the unit weighs 290 g, which places it in the compact size class. Both a semi-auto drain and a manual drain are fitted, giving you a choice of how to empty the bowl. There is no lubricator in this unit; it only filters and regulates. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C08SJWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic jig or a small indexing table with clean, regulated air at up to 0.9 MPa. The 5 um element protects fine metering valves from particle wear.
Use it on a lab bench to supply a consistent pressure to a prototype actuator or a flow test setup. The metal bowl stands up to shop-floor handling and the manual drain gives quick emptying.
Mount it on a small assembly station where a single operator runs one screwdriver or press. The semi-auto drain releases condensate during operation, reducing the need for manual checks.
Choose this GAFR200 when your line is 1/4in and space is tight, as the 290 g body is the lightest in the GAFR family. The metal bowl (C) is a build choice, and the 5 um element (W) suits precision valves or instrument air, though it will need service more often than a 40 um element. This model has no bracket (J), so plan for a panel mount or an existing support, and the fitted circular gauge reads in MPa/psi on the NPT thread. The semi-auto and manual drains are both present, so you can drain manually or let the semi-auto function work during operation. If your line needs oil downstream, order the matching GAFC200-08 combination instead, as this unit does not lubricate. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so keep the inlet near 1.0 MPa if you need the full outlet pressure.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum supply of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, and the unit weighs 290 g.
The W code specifies a 5 um element, which traps much finer solid particles than the standard 40 um grade. This is useful for precision pneumatic valves or instrument air, but the finer element will clog faster and require more frequent service.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.