Airtac GAFR Adjustable Filter Regulator GAFR200N06AS
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N06AS is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N06AS
The GAFR200N06AS is a filter and regulator combined in a single body, so incoming air is spun to separate liquid water and solid particles before a balanced regulator sets a steady outlet pressure. This nylon-bowl unit carries a 1/8in port and a 40 um element, with a working range of 0.15-0.9 MPa (20-130 psi).
Because the filter and regulator share one housing, this part replaces a separate GAF filter plus GAR regulator, cutting the number of joints to seal and reducing rail width. The pressed-in self-locking knob resists set-pressure drift from vibration, while the automatic drain clears condensate without manual attention.
Airtac GAFR Adjustable Filter Regulator GAFR200N06AS Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06AS |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N06AS
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N06AS Is Used
Compact jig actuation
Feed a single pneumatic clamp or small positioning jig on an assembly bench, where the 1/8in port matches short tubing runs and the 25 cc bowl handles light condensate.
Prototype test rigs
Supply a stable 0.15-0.9 MPa output to a benchtop test fixture with a pressure gauge, letting an engineer verify component behavior without a bulky multi-part filter train.
Maintenance workstations
Mount on a portable service cart for pneumatic tools, using the automatic drain to keep the line clear during intermittent use in a workshop environment.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N06AS the Right Air-Prep Unit?
Choose the GAFR200 for small jigs or single actuators where a 1/8in port and 290 g mass suit compact framing; step up to the GAFR300 if you need 1/4in to 1/2in ports and a 60 cc drain bowl. The nylon bowl is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or metal, so confirm compatibility for aggressive surroundings. This model has an automatic drain, the standard pressure type, the mounting bracket included, a fitted gauge with MPa/psi scale, and a 40 um element; the K option adds a reverse-flow valve if required. For lines needing oil downstream, order the matching GAFC200-06 combination instead of this unit. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan a supply near 1.0 MPa if you intend to set the regulator at its ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N06AS FAQ
The GAFR200N06AS is a filter and regulator in one body with a 1/8in port, working range 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 40 um element, 25 cc drain bowl, and 290 g weight. The automatic drain clears condensate without manual intervention, and the gauge reads MPa/psi.
The automatic drain expels accumulated condensate from the 25 cc bowl without operator action, which suits unattended or wet lines. This contrasts with the blank drain option that ships both semi-auto and manual drains for scheduled maintenance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N06AS
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.