
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08ALNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08ALNT is a filter and regulator combined in a single body, saving rail space and reducing potential leak points compared to separate units. It delivers air filtered to 40 um and regulated to 0.15-0.4 MPa (20-58 psi) through its 1/4in port, with a nylon bowl and automatic drain.
This lower-pressure model suits applications needing a capped output. The diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced regulator maintains the set pressure as supply varies. Weighing 290 g, it is a compact unit for small machines. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08ALNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with stable, lower pressure. The 0.4 MPa ceiling protects delicate workpieces from over-force.
Provide filtered, regulated air to a laboratory instrument or test rig requiring a modest, consistent pressure below 0.4 MPa.
Power a small bench-mounted pneumatic tool or air jet, with the automatic drain handling condensate in humid shop conditions.
Choose the GAFR200 body for small jigs or single actuators with 1/4in ports. The nylon bowl offers a build alternative to PC or metal, with the same 1.0 MPa max pressure rating. This model has an automatic drain for wet lines, a lower-pressure type capped at 0.4 MPa, and includes the mounting bracket. No gauge is fitted, but the 1/8in connection allows adding one. The 40 um element suits general shop air; the 5 um option is for finer filtration. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For lubrication downstream, order the matching GAFC200-08 combination. Note that the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, -5 to 70 C temperature range, 40 um element, 25 cc drain bowl, and weighs 290 g.
The 'L' code means the regulated output is capped at 0.4 MPa (58 psi), unlike the standard type which goes to 0.9 MPa. This is ideal for applications needing a limited, stable pressure. If your machine may ever require more than 0.4 MPa, choose the standard type instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.