
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08ALNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08ALNWT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a fine 5 um element.
This nylon-bowl version uses a diversion structure to spin out liquid water and solid particles into its 25 cc condensate bowl. The automatic drain clears accumulated liquid without manual intervention, and the unit weighs just 290 g, making it suitable for compact machine frames. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08ALNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp on a CNC fixture with regulated 0.15-0.4 MPa air, using the 5 um element to protect delicate solenoid valves from fine particulates.
Supply a hand-held air tool on a benchtop assembly line where a compact 290 g unit with a 1/4in port fits into tight spaces and the automatic drain reduces maintenance.
Provide clean, low-pressure air to a lab instrument or test rig, where the 5 um filtration and stable lower-pressure regulation protect sensitive measurement equipment.
Choose this GAFR200 body for small jigs or single actuators needing a 1/4in port and a compact footprint; the 2000 L/min flow envelope at 0.7 MPa inlet is plotted for sizing, not as a rated capacity. The nylon bowl is a build choice, and the automatic drain suits unattended or wet lines, while the included mounting bracket simplifies installation. The 5 um element traps finer particles for sensitive equipment, and the L-type regulation tops out at 0.4 MPa, so confirm your supply never needs more. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The unit features a 5 um element and an automatic drain.
The automatic drain continuously expels condensate from the 25 cc bowl without manual intervention, making it ideal for wet or unattended air lines. This model also has a nylon bowl and includes the mounting bracket, but no gauge is fitted, so the 1/8in gauge connection is available if you need to add one.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.