
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08ASJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08ASJWTK is a single-body filter and regulator: incoming air is spun through a diversion structure so water and solid particles fall into the 25 cc drain bowl, then a balanced mechanism sets a steady outlet pressure between 0.15 and 0.9 MPa (20-130 psi). The 5 um element catches far finer grain than the standard 40 um grade, which suits precision valves and small instrument circuits fed through the 1/4" port.
This compact 290 g unit carries a nylon bowl, an automatic drain that ejects condensate without anyone opening it, and a circular gauge with clip and magnifier reading MPa/psi on the NPT thread. The pressed-in self-locking knob holds the setpoint against vibration, and a reverse-flow (reflux) valve is fitted as a separate ordering feature. There is no lubricator in this body; if the line needs oil mist downstream, order the matching GAFC200-08 combination instead.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08ASJWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
A 5 um element and a steady 0.15-0.9 MPa outlet protect small clamping actuators and sensitive pilot valves on a single-station jig.
The fitted MPa/psi gauge and fine filtration make this a tidy supply point for lab benches and instrument-air test setups on 1/4" lines.
Automatic condensate draining keeps a small sealing or labelling head running on a wet shop-air line without daily bowl checks.
Choose this model when a 1/4" line needs fine 5 um filtration plus regulation in one 290 g body and you want condensate handled unattended: the automatic drain suits wet or rarely visited installations, while the nylon bowl is a build choice for environments where you should confirm material compatibility with the datasheet. No mounting bracket is supplied, so plan a panel or existing bracket rather than tubing support. The gauge is fitted and its NPT thread reads MPa/psi, and the K code adds the reverse-flow (reflux) valve as an ordering difference. If your machine could ever need more than 0.9 MPa, note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near the maximum.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
It regulates 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, the unit weighs 290 g, the port is 1/4", the element grade is 5 um, and the flow curve is plotted to 2000 L/min at 0.7 MPa inlet.
No. In this SKU the N sits before the port code, so it is the nylon bowl material, not the no-gauge option. A no-gauge code would be an N after the port letters. This model has the circular gauge fitted, reading MPa/psi on its NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.