
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08LJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08LJNTK is a compact filter & regulator from AirTAC, combining air filtration and pressure regulation in a single body. With a 1/4in port and a lower-pressure range of 0.15-0.4 MPa (20-58 psi), it delivers clean, stable air to small jigs or single actuators. The nylon bowl and 40 um element handle water and solid particles, while the 25 cc drain bowl captures condensate.
This unit replaces a separate filter plus regulator, reducing potential leak points and saving rail space. The balanced, self-locking regulator holds the outlet steady as supply pressure varies, and the pressed-in knob resists drift from vibration. A reverse-flow (reflux) valve is fitted, and the gauge connection is 1/8in for later additions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08LJNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture on a workbench, where the 1/4in port and 290 g mass fit neatly into a compact setup.
Supply a delicate pressure-test station that must stay within 0.15-0.4 MPa, using the lower-pressure regulator to avoid over-pressurizing sensitive components.
Use on a small prototype assembly line where the filter removes water and solids from shop air before it reaches a single actuator or valve.
Choose the GAFR200N08LJNTK for low-pressure circuits that never need more than 0.4 MPa (58 psi). The nylon bowl offers a build choice without changing the common 1.0 MPa max pressure or -5 to 70 C range. The semi-auto drain requires manual intervention, while the included bracket is omitted (J) for panel-mount setups. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If oil is needed downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200N08LJNTK has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc, and the unit weighs 290 g. It has a 40 um element and a semi-auto plus manual drain.
The reverse-flow (reflux) valve is fitted as an ordering difference on this model. Its specific function is detailed in the AirTAC catalogue, but it is not explained in the available data. The unit still operates as a standard filter & regulator with a 1/4in port and lower-pressure range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.