
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08SJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08SJNT is a genuine AirTAC filter & regulator that combines both functions in a single body, saving rail space and reducing potential leak points compared to separate units. This 1/4in port version weighs just 290 g and uses a nylon bowl, with a 40 um element filtering solid particles and liquid water.
It delivers a regulated outlet pressure from 0.15 to 0.9 MPa (20-130 psi), with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The unit operates from -5 to 70 C and must not freeze. This model ships without a gauge and without a mounting bracket. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08SJNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp on a benchtop assembly fixture with clean, regulated air at a stable pressure.
Supply a small air screwdriver or blow gun on a workbench, with the filter protecting the tool from moisture and particulates.
Provide regulated air to a laboratory test setup where a compact filter-regulator is needed for a single instrument.
Choose the GAFR200 for small jigs or single actuators where a compact footprint matters; the GAFR300 with its 60 cc bowl and 3500 L/min envelope at 0.7 MPa inlet handles larger flows. This nylon bowl version suits applications where a transparent PC bowl isn't preferred, though all materials share the same 1.0 MPa max pressure and -5 to 70 C rating. The semi-auto drain plus manual drain is fitted, giving you both automatic condensate release and a manual override. The standard type covers 0.15-0.9 MPa, while the L type tops out at 0.4 MPa if you only need low pressure. No bracket is included with this J code, so plan for panel mounting or an existing bracket. No gauge is supplied; the 1/8in gauge connection allows adding one later. The 40 um element is the standard grade, with a 5 um option for finer filtration. NPT threads are used with an MPa/psi gauge scale. If downstream lubrication is needed, order the GAFC200-08 combination instead. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200N08SJNT is a filter & regulator with a 1/4in port. Its pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The J code means the mounting bracket is omitted, for installations using an existing bracket or panel mount. The N code after the port means no gauge is supplied; the 1/8in gauge connection is available if you need to add one. This reduces initial cost when these features aren't required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.