
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08SJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08SJT is a filter and regulator combined into a single body, so incoming air is cleaned and set to a steady outlet pressure without needing separate components. This 1/4in unit works in the 0.15-0.9 MPa (20-130 psi) range with a 40 um element, and its nylon bowl collects condensate.
Because the filter and regulator share one housing, this replaces a separate GAF filter plus GAR regulator, meaning fewer joints to seal and less rail space consumed. The pressed-in self-locking knob holds the set pressure against vibration, while the diversion structure spins air to separate liquid water and solid particles into the 25 cc drain bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08SJT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic cylinder or small fixture on an assembly bench where 1/4in ports match the existing tubing and the 290 g body mounts directly to the machine frame.
Provide filtered, regulated air to a handheld air tool or a small blow-off station where the 25 cc bowl is drained after each shift and the compact body fits in tight spaces.
Use on a test rig or pilot line where the 2000 L/min envelope at 0.7 MPa inlet is enough for a single actuator, and the self-locking knob keeps the set point stable during experiments.
Choose the GAFR200 body for small jigs or single actuators where 1/4in ports and a 2000 L/min flow envelope (plotted at 0.7 MPa inlet) are sufficient. The nylon bowl (N) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or metal, so confirm compatibility for aggressive surroundings. This model ships without the mounting bracket (J), so plan for panel mounting or an existing bracket, and it includes both semi-auto and manual drains for flexible condensate removal. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If oil is needed downstream, order the matching GAFC200-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan the inlet pressure near maximum for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
The GAFR200N08SJT is a filter & regulator with a 1/4in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 40 um element, 25 cc drain bowl, and 290 g weight. It has a nylon bowl, semi-auto plus manual drain, no mounting bracket, and a fitted gauge with MPa/psi scale.
The N after the body digits means the bowl is nylon, chosen as a build material with the same pressure and temperature ratings as PC or metal versions. The J code means the mounting bracket is omitted, so you need a panel mount or existing bracket. Both options let you tailor the unit to your installation without changing the filter or regulator performance.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.