
The AirTAC GAFR Adjustable Filter Regulator GAFR200N08SJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N08SJTK combines a 40 um air filter and a pressure regulator in a single body, saving rail space compared to separate units. This 1/4in version with a nylon bowl weighs 290 g and filters water and solids via a diversion structure before regulating pressure.
It delivers a steady 0.15-0.9 MPa (20-130 psi) outlet, with a max supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The pressed-in self-locking knob resists set-pressure drift from vibration, and the included circular gauge shows MPa/psi. Operating range is -5 to 70 C and must not freeze. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08SJTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Feed a single pneumatic clamp on a benchtop fixture with stable 0.15-0.9 MPa pressure. The 40 um element protects the clamp's seals from particulates, while the self-locking knob holds the setpoint during machine vibration.
Supply a lab test rig that cycles a small cylinder. The combined filter-regulator saves space on a crowded manifold, and the 25 cc drain bowl is easy to check between test runs.
Power a handheld air tool on a service cart. The nylon bowl resists common shop impacts, and the semi-auto drain lets you purge condensate manually before each shift.
This GAFR200 body suits small jigs or single actuators with its 1/4in port and 25 cc drain bowl. The nylon bowl is a build choice; common specs (1.0 MPa max, -5 to 70 C) apply to all materials, so confirm compatibility for aggressive surroundings. It ships with both semi-auto and manual drains, a 40 um element, and a circular gauge, but no mounting bracket (J). The NPT thread sets the gauge scale to MPa/psi, and the reverse-flow (reflux) valve is fitted as an ordering difference. If oil is needed downstream, order the matching GAFC200-08 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Pressure range is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g. It has a 1/4in port, 40 um element, and a circular gauge with MPa/psi scale.
The K code means a reverse-flow (reflux) valve is fitted to the GAFR200N08SJTK. It is an ordering difference from models without K; the catalogue defers its function to a separate page. This unit still has no lubricator and does not add oil to the air.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.