Airtac GAFR Adjustable Filter Regulator GAFR600C25SK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR600C25SK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight1880 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR600C25SK
The GAFR600C25SK is a filter and pressure regulator combined into a single body, sized for heavy industrial lines with a 1 inch port. It spins incoming air to separate liquid water and solid particles, then delivers a steady outlet pressure through a balanced, self-locking regulator mechanism.
This unit handles 0.15-0.9 MPa (20-130 psi) with a 40 um filter element and a metal condensate bowl. Weighing 1880 g, it is the largest GAFR body and requires a proper frame or panel mount rather than support from the tubing.
Airtac GAFR Adjustable Filter Regulator GAFR600C25SK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR600C25SK |
|---|---|
| Series | GAFR600 filter & regulator |
| Port size | 1" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 205 cc |
| Bracket | Included |
| Weight | 1880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR600C25SK
| GAFR600 | GA600 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: Metal (C) only. |
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) only. |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC600-25 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR600 · 1" · curve to 12000 L/min |
|---|---|
| One size down | GAFR500 |
| Add a lubricator | GAFC600-25 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR600C25SK Is Used
Machine header supply
Feed a multi-station assembly machine header where one filtered, regulated air source supports several actuators and tooling stations.
Conveyor line control
Supply a long conveyor system's pneumatic controls, providing clean, pressure-stable air to valves and cylinders along the line.
High-flow test rigs
Power a pneumatic test bench that needs consistent pressure for cycling components, with the large 205 cc bowl reducing drain frequency.
Is the Airtac GAFR Adjustable Filter Regulator GAFR600C25SK the Right Air-Prep Unit?
Choose the GAFR600 body for high-flow applications where a 1 inch port and the 12000 L/min flow envelope at 0.7 MPa inlet are needed. The metal bowl is standard for this size, and the included mounting bracket suits stationary installations. This model ships with both semi-auto and manual drains, a fitted circular gauge reading MPa/psi, and the reverse-flow valve attached as an ordering option. If the line requires lubrication downstream, order the matching GAFC600-25 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: Metal (C) only
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 205 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 1880 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC600-25 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR600C25SK FAQ
Working pressure is 0.15-0.9 MPa (20-130 psi), maximum pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 205 cc and the unit weighs 1880 g.
The K indicates a reverse-flow (reflux) valve is fitted. This is an ordering difference from models without the K code. The valve's function is detailed in a separate catalogue section not covered here.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR600C25SK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.