The AirTAC AirTAC GC200C08MLC2W F.R.L. Unit 1/4 in PT Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built into one conditioning station. This GC200C08MLC2W is the 200 size with 1/4 in PT ports. The filter section carries the 5 um element (code W) for finer water and particulate removal than the standard 40 um grade, with metal bowls and a manual drain for controlled blow-down. The regulator is the low-pressure type, and this configuration is fitted with an external round gauge scaled in psi. Mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options for manual, automatic or differential-pressure drains, 40 um or 5 um filtration, gauge style and scale, G or NPT threads and a reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | AirTAC GC200C08MLC2W F.R.L. Unit 1/4 in PT Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeding the cylinders and vacuum generators of a carton sealer or wrapping line with filtered, regulated and lubricated air held at a stable low-pressure setting.
Supplying clamps, air tools and workholding fixtures on a machining cell, with the 5 um element helping protect fine-control valves from particulate and carryover.
Conditioning air for conveyor stopper cylinders and diverters, where the lubricator section supports predictable seal life on continuously cycling stations.
Choose the size step (200/300/400/600) and port - here 1/4 in PT - against the air demand of the circuit; larger sizes carry larger ports for higher flow. Drain choice matters: the manual drain on this unit needs periodic operator blow-down, while automatic and differential-pressure drains handle condensate unattended. Filter grade is 40 um standard or 5 um with the W code; this unit carries the finer 5 um element. Gauge options are the embedded square gauge or an external round gauge, scaled in MPa, psi or bar - this configuration has the round gauge in psi. Thread is PT as standard, with G (BSPP) and NPT available to order, and a bracket is included. Flow for the GC series is published as curves, not a single rating, so send us your pressure and air-demand figures and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your operating pressure and air demand and we will confirm the flow and sizing from the datasheet on request.
The manual drain means an operator opens the drain valve periodically to purge collected water - simple and dependable where checks are part of the routine; automatic and differential-pressure drains are available if you want unattended operation. The regulator is the low-pressure type, intended for lower downstream settings than the standard version; the exact adjustment range for this configuration is not published in the catalogue, so we confirm it on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.