
The AirTAC GC300-10 FRL Unit (GC30010AC1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30010AC1TK is an AirTAC GC-series three-unit F.R.L. combination - separate filter, regulator and lubricator - with the K option adding a reverse (check) valve to the set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter bowl carries an automatic drain, the standard 40 um element suits general plant air, and the regulator covers 0.15-0.9 MPa (20-130 psi) in this automatic-drain configuration. The C1 code brings an external round gauge with an MPa scale.
This is a genuine AirTAC part from the G series, offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch. Alternative drains, filter grades, gauges and G/BSPP or NPT threads are catalogue options. Flow is published as curves rather than a single rated figure, so we confirm sizing and datasheet figures on request.
| Model | AirTAC GC300-10 FRL Unit (GC30010AC1TK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Regulated, filtered and lubricated air to a pneumatic press station, with the reverse (check) valve helping hold downstream pressure should the upstream supply drop.
Air preparation for filler and capper actuation on a bottling conveyor, where the automatic drain deals with condensate from high daily air throughput.
A point-of-use F.R.L. set feeding grippers and end-of-arm tooling on a robot cell, giving stable settable pressure read on the MPa gauge.
Choose the K version when the downstream circuit needs a reverse (check) valve built into the set, for example to hold downstream pressure if upstream supply is interrupted. Size 300 with the 3/8 inch NPT port covers mid-range air demand; move to size 400/600 for higher flow or size 200 for smaller lines. The automatic drain (A) minimises maintenance; manual and differential-pressure drains also exist in the series. The standard 40 um grade fits general air, and the W option provides 5 um filtration.
This code includes a round MPa-scale gauge; square gauges and psi or bar scales can be ordered instead. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. As flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow as performance curves rather than a single rated figure, so we do not quote one number here. Share your working pressure and consumption and we will confirm the sizing from the datasheet on request.
K specifies that a reverse (check) valve is fitted to this three-unit set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.