
The AirTAC GC300-10 FRL Unit (GC30010AC1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30010AC1WT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator for compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The W code fits the finer 5 um filter element instead of the standard 40 um, giving cleaner air for sensitive downstream equipment, while the automatic drain on the filter bowl expels condensate without manual attention. The regulator covers 0.15-0.9 MPa (20-130 psi) in this automatic-drain configuration, and the C1 code adds an external round gauge with an MPa scale.
This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch. Drain types, gauges and G/BSPP or NPT threads are available as orderable options. Flow is published as curves rather than a single rated figure, so we confirm sizing and datasheet figures on request.
| Model | AirTAC GC300-10 FRL Unit (GC30010AC1WT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Finely filtered, regulated and lubricated air to benchtop test rigs and lab actuation, where the 5 um element protects sensitive pneumatic components from particulates.
Air preparation for handling and clamping actuators in a lens-finishing cell, with 5 um filtration helping keep contamination away from precision work.
A point-of-use F.R.L. set on a weaving or spinning machine air line, where the automatic drain manages condensate and the lubricator serves the machine's air cylinders.
Specify the W (5 um) grade when downstream instruments, valves or processes need finer filtration than the standard 40 um; the trade is a somewhat higher duty on the element. Size 300 with the 3/8 inch NPT port serves mid-range demand - step to size 400/600 for more flow or size 200 for less. The automatic drain (A) suits unattended operation; manual and differential-pressure drains are also in the series. The round MPa gauge in this code can be swapped for a square gauge or a psi/bar scale.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Bracket mounting is available. Because flow appears only as published curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
Flow for this unit is published by AirTAC as performance curves rather than a single rated figure, so no single number is quoted here. Tell us your pressure and air demand and we will confirm the sizing from the datasheet on request.
The W fits a 5 um filter element instead of the standard 40 um, for finer filtration. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.