
The AirTAC GC300-10 FRL Unit (GC30010AC1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30010AC1WTK is an AirTAC GC-series three-unit F.R.L. combination - separate filter, regulator and lubricator - with a 5 um filter element (W) and a reverse (check) valve fitted (K). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter bowl has an automatic drain, the regulator covers 0.15-0.9 MPa (20-130 psi) in this automatic-drain configuration, and the C1 code adds an external round gauge with an MPa scale.
This is a genuine AirTAC part from the G series, available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch. Alternative drains, the standard 40 um grade, square gauges and psi/bar scales, and G/BSPP or NPT threads are all catalogue options. Flow is published as curves rather than a single rated figure, so we confirm sizing and datasheet figures on request.
| Model | AirTAC GC300-10 FRL Unit (GC30010AC1WTK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Clean, regulated and lubricated air to pneumatic valve positioners and actuators on a process skid, with the 5 um element protecting sensitive pilot components.
Air preparation for form-fill-seal packaging machines, where finer filtration supports hygiene-sensitive equipment and the check valve helps hold circuit pressure.
Filtered and pressure-stabilised air to spraying and atomising equipment in a finishing line, read and set via the MPa gauge and served continuously by the automatic drain.
Pick this code when you need both finer 5 um filtration and a reverse (check) valve in the three-unit set - for instance where clean air must be held downstream if the supply line drops. Size 300 with the 3/8 inch NPT port covers mid-range demand; adjust the size step (200 to 600) to match required flow. The automatic drain (A) keeps maintenance low; manual and differential-pressure drains are offered elsewhere in the series.
The round MPa-scale gauge can be replaced by a square gauge or a psi/bar scale when ordering. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published only as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
Yes - on request. AirTAC publishes flow as performance curves rather than a single rated figure, so we do not state one number here. Send your working pressure and consumption and we will confirm the datasheet figures and correct sizing.
WK combines two options: a 5 um filter element (finer than the standard 40 um) and a fitted reverse (check) valve. The base decode stays the same - size 300, NPT3/8 port, NPT thread, automatic drain and a round MPa-scale gauge - so it suits circuits needing both cleaner air and downstream pressure retention.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.