
The AirTAC GC300-15 FRL Unit (GC30015LF1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30015LF1WT is the fine-filtration version of the three-piece AirTAC G-series F.R.L. set: separate filter, pressure regulator and lubricator in one combination. The W suffix specifies the 5 um filter element instead of the standard 40 um grade, so it suits air circuits that are more sensitive to fine particulate. The regulator is the low-pressure type (marked L) and carries an embedded square gauge on an MPa scale; the filter bowl drains by differential pressure. Ports are 1/2 inch in NPT thread for the 300 size.
This is a genuine AirTAC part distributed in the US market. Across the G-series you can choose the 200/300/400/600 sizes from 1/8 to 1 inch ports, G (BSPP) or NPT threads, 40 um or 5 um filtration, automatic or manual drain in place of the differential-pressure bowl, and alternate gauge scales. Because rated flow is published as curves rather than one number, we confirm the datasheet and sizing for your application on request.
| Model | AirTAC GC300-15 FRL Unit (GC30015LF1WT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Clean, regulated and lightly lubricated supply for pneumatic functions on laboratory and analytical equipment, where the 5 um element protects sensitive air controls from fine particulate.
Conditioned air for grippers and tool changers on a robotic cell: the fine filter guards the small control valves, the low-pressure regulator suits delicate grip force circuits and the lubricator services the actuator.
Supplies filtered, regulated air to spray guns and air-assisted applicators in a finishing booth, with the 5 um grade reducing particulate that would otherwise show in the coating.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If your line is a different port step, the 200/400/600 sizes cover 1/8 to 1 inch and we confirm flow against the published curves before ordering. The differential-pressure drain bowl is standard; automatic (A) or manual (M) drain are catalogue alternatives. The low-pressure (L) regulator type differs from the standard type, so confirm its set-point range with us from the datasheet. G (BSPP) and NPT are orderable options, as are psi or bar gauge scales.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the G-series as performance curves rather than a single rated figure, so we do not state a number here. Tell us your line pressure and downstream demand and we will confirm the sizing from the datasheet on request.
The standard G-series element is 40 um; the W suffix specifies the 5 um grade for circuits that need finer particulate removal. It is the same three-unit F.R.L. set in every other respect, including the 1/2 inch NPT ports and the MPa square gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.