
The AirTAC GC300-15 FRL Unit (GC30015MC1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is a three-unit air preparation set: a separate filter, regulator and lubricator, so compressed air is cleaned, regulated and oil-misted in one supply. This GC30015MC1WT is the 300 size with NPT1/2 ports, a manual drain on the filter bowl, the W-specified 5 um filter element and an external round gauge reading in MPa. Max working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), the 300-size bowls are polycarbonate (PC), and the operating range is -5 to 70 C.
It is a genuine AirTAC part. The G series runs from size 200 to 600, where larger sizes give larger ports and more flow, with options including automatic or differential-pressure drains, the standard 40 um element, G (BSPP) or NPT threads and a check valve (K). Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | AirTAC GC300-15 FRL Unit (GC30015MC1WT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeds spray guns and finishing stations, where the 5 um element removes finer particles ahead of the regulator and lubricator to keep the delivered air clean for coating work.
Supplies the clamping cylinders on metrology and inspection fixtures, where the 5 um grade helps protect sensitive pilot valves from fine contamination.
Serves the diverters, stoppers and lift cylinders on a bottling conveyor, combining fine filtration, a set working pressure and oil mist in one point-of-use set.
Size 300 with NPT1/2 ports sits mid-range in the GC family; step to 200, 400 or 600 as your pipe and demand change. The W suffix selects the 5 um element instead of the standard 40 um grade - the right call when the downstream equipment needs finer particle removal. The M suffix means a manual drain, which suits attended lines and widens the regulator range to 0.05-0.9 MPa; choose A (automatic) or the differential-pressure default for unattended duty. This set carries a round external gauge on the MPa scale; psi and bar scales exist in the range. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves, not one rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number here. Send your line pressure and air demand and we will confirm the sizing and datasheet figures for this 300-size, NPT1/2 unit on request.
The W suffix selects a 5 um filter element instead of the standard 40 um grade. Choose W when finer particle removal matters for the equipment downstream, and stay with the standard grade for general plant supply. We can confirm the element details from the datasheet on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.