verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC300-15 FRL Unit (GC30015MC3WT)

The AirTAC GC300-15 FRL Unit (GC30015MC3WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$107.41 $114.91Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-15 drain, gauge and thread option on one page All GC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC300-15 FRL Unit (GC30015MC3WT)

The GC30015MC3WT is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator units assembled as one set. The W suffix selects the fine 5 um filter element, so water and finer particulate are stripped before the regulator holds outlet pressure (0.05-0.9 MPa / 7-130 psi with manual drain) and the lubricator doses oil mist for downstream equipment. Bowls on the 300 size are PC (polycarbonate) with manual drains, and the external round gauge reads in bar on the 1/2 in NPT ports.

This is a genuine AirTAC part. The GC range spans 200, 300, 400 and 600 sizes with 1/8 in to 1 in ports, G (BSPP) or NPT threads, automatic or differential-pressure drains, the standard 40 um element when the finer grade is not needed, and MPa, psi or bar gauge scales. Flow is published only as curves, so we confirm the datasheet and sizing for your application on request.

AirTAC GC300-15 FRL Unit (GC30015MC3WT) Technical Specifications

ModelAirTAC GC300-15 FRL Unit (GC30015MC3WT)
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/2" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — round, bar scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC300-15 FRL Unit (GC30015MC3WT)

GC300G-series F.R.L. combination, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/2" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-15
Build orderFilter → regulator → lubricator

Where the AirTAC GC300-15 FRL Unit (GC30015MC3WT) Is Used

science

Analytical instrument air

Supplies 5 um-filtered, regulated and lubricated air to pneumatic samplers and valve manifolds on a process-analyser skid, where finer particulate control protects small pilot valves.

factory

Food packaging machinery

Conditions air for form-fill-seal and tray-packing machines, using the fine 5 um element ahead of delicate directional valves and vacuum generators that coarse shop-air debris can foul.

cable

Textile machine actuation

Feeds doffing cylinders and thread-tension air jets on spinning and winding frames, where the fine filter and steady regulated pressure keep small-bore nozzles clear through long runs.

Is the AirTAC GC300-15 FRL Unit (GC30015MC3WT) the Right Station?

Size 300 with a 1/2 in NPT port sits mid-range in the GC series - check the 200/400/600 steps against the flow your line needs before settling on it. The manual drain (M) suits installations with operator access; choose automatic or differential-pressure drain for unattended duty, remembering the regulator range is 0.05-0.9 MPa with manual drain versus 0.15-0.9 MPa with the others. The W element's 5 um grade suits instrumentation and finer pneumatic components; use the standard 40 um element where coarse filtration is enough. This code carries a round bar-scale gauge; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.

AirTAC GC300-15 FRL Unit (GC30015MC3WT) FAQ

AirTAC does not publish a single rated flow figure for the GC series - capacity is shown as performance curves. We therefore confirm flow and the full datasheet for the GC30015MC3WT on request; send us your line pressure and demand and we will verify the size before you order.

Choose the W suffix when the downstream equipment includes fine components - pilot-operated valves, air bearings, nozzles, instrumentation - that tolerate less particulate. The standard 40 um element is sufficient for general cylinder and tool duty. Note that changing the grade only changes the element; drain type, gauge and port configuration stay as coded.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC300-15 FRL Unit (GC30015MC3WT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC30015MC3WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.