
The AirTAC GC300-15 FRL Unit (GC30015MF1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC30015MF1WT is an AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator working together as one prepared-air package for a 1/2 in. NPT port. This configuration has a manual drain on the filter bowl, the finer 5 um filter element, and an embedded square pressure gauge reading in MPa. The lubricator adds an oil mist to the downstream air for cylinders, valves and tools that need lubrication.
This is a genuine AirTAC part in the GC300 size. The G-series runs from size 200 to 600 with larger ports and higher flow, and the F.R.L. is offered with a choice of drain type, 40 or 5 um filtration, gauge shape and scale, three thread types (NPT on this code), and an optional bracket. Flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
| Model | AirTAC GC300-15 FRL Unit (GC30015MF1WT) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to clamping fixtures, tool-change cylinders and chip-ejection jets on a CNC machining centre supplied from a 1/2 in. plant-air drop.
Prepares air for the stopper gates, pusher cylinders and grip pads that index bottles along a packaging conveyor, with the 5 um element protecting the directional valves.
Supplies lubricated air to impact wrenches and air ratchets along a truck and bus maintenance bay, with the regulator holding a steady setting at each service position.
The GC300 size with a 1/2 in. NPT port is the mid-large step of the range; step down to GC200 or up to GC400/600 to match your pipework and air demand. The 5 um element here suits airlines feeding precision valves and cylinders, while the 40 um standard grade is the usual choice for general plant air. Manual drain means an operator opens the bowl drain during routine checks; automatic or differential-pressure drain versions remove that chore. The regulator is the standard type, adjusting 0.05-0.9 MPa (7-130 psi) on this manual-drain version. Gauge choices are square or round with MPa, psi or bar scales. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. order the G (BSPP) or NPT option if your pipework needs it. Because flow appears only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the G-series as curves, not as a single rated figure, so we do not quote a number here. Send us your air demand and line conditions and we will confirm the sizing and the datasheet flow curve on request.
Manual drain means an operator opens the filter bowl drain during routine checks. The same GC300 combination is also available with an automatic or a differential-pressure drain if you prefer unattended moisture removal.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.