verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC400 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC400-10 FRL Unit (GC40010AC3TK)

The AirTAC GC400-10 FRL Unit (GC40010AC3TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$183.85 $191.35Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC400-10 drain, gauge and thread option on one page All GC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC400-10 FRL Unit (GC40010AC3TK)

The AirTAC GC40010AC3TK is a genuine AirTAC three-unit F.R.L. combination - separate filter, regulator and lubricator - with the K option fitted: a reverse (check) valve. In practice the set still filters compressed air to 40 um with an automatic-drain bowl, regulates downstream pressure between 0.15 and 0.9 MPa (20-130 psi) with the automatic drain, and meters oil mist, while the check valve guards against reverse flow through the unit. It carries a 3/8 in NPT port, a round external gauge reading in bar, and a maximum working pressure of 1.0 MPa (145 psi) from -5 to 70 C (non-freezing). Bowls on the 400 size are PC (polycarbonate).

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Since flow appears only as curves in the AirTAC catalogue, we confirm flow and datasheet figures on request.

AirTAC GC400-10 FRL Unit (GC40010AC3TK) Technical Specifications

ModelAirTAC GC400-10 FRL Unit (GC40010AC3TK)
SeriesGC400 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — round, bar scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC400-10 FRL Unit (GC40010AC3TK)

GC400G-series F.R.L. combination, 400 body — sets the port range.
10Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC400 · PT3/8" · 40 µm
One size downGC300
One size upGC600
Two-unit equivalentGFC400-10
Build orderFilter → regulator → lubricator

Where the AirTAC GC400-10 FRL Unit (GC40010AC3TK) Is Used

precision_manufacturing

CNC fixture clamping circuit

A machining cell running hydraulic-assist pneumatic fixture clamps uses this set at the branch supply: filtered 40 um air, regulated clamp pressure and lubricated air cylinders, with the check valve helping isolate the clamp circuit from upstream pressure decay when the main header vents.

science

Lab automation pneumatic supply

In a laboratory automation island with pick-and-place mini grippers, this F.R.L. set conditions the 3/8 in NPT branch feeding the manifold. The automatic drain keeps condensate out of sensitive motion axes, and the bar-scale round gauge documents the set pressure for process records.

valve

Process valve actuation skid

A water-treatment skid actuating butterfly valves with double-acting pneumatic actuators takes its instrument-grade supply through this set. Filtered, regulated, lubricated air feeds the positioner and actuator, and the reverse valve in the K variant supports the skid's anti-backflow arrangement.

Is the AirTAC GC400-10 FRL Unit (GC40010AC3TK) the Right Station?

This configuration suits a branch line where backflow protection matters: the K-suffix check valve is the only difference from the plain GC40010AC3. Keep the 400/3/8 in NPT port size if your demand sits within the range of a 3/8 in drop; go to size 600 for more flow. The automatic drain suits unattended duty; manual drain (M) fits supervised cells and widens the regulator range to 0.05-0.9 MPa (7-130 psi). The 40 um element is standard - order the W variant for 5 um. The bar-scale round gauge can be swapped for a square gauge on MPa, psi or bar scales.

Because published flow is curve data rather than one rated figure, ask us to confirm sizing for your line before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.

AirTAC GC400-10 FRL Unit (GC40010AC3TK) FAQ

There is no single published rated flow for the GC400 series - AirTAC provides flow as curves. Rather than quote a figure we cannot back up, we will confirm the flow and datasheet data for your operating conditions on request; just send us your line pressure and demand.

K means a reverse (check) valve is fitted, so air cannot flow backwards through the set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Choose the code without K if reverse flow is not a concern in your circuit.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC400-10 FRL Unit (GC40010AC3TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC40010AC3TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.