
The AirTAC GC400-10 FRL Unit (GC40010ALC2T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC400-10 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. It conditions compressed air in one pass: water and particulate are drained off, downstream pressure is held at the set point, and a fine oil mist is carried into the air line to lubricate downstream pneumatic components. A round external gauge on a psi scale is fitted so the regulated pressure can be read directly.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 inch, three thread types (NPT on this code), plus choices of drain type, 40 um or 5 um filtration, gauge style and scale. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request. Order code GC40010ALC2T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC400-10 FRL Unit (GC40010ALC2T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Installed ahead of a pneumatic press or clamping station, the set removes condensed water and swarf, holds a stable regulated supply, and meters oil mist to extend cylinder and valve life.
Mounted at the line drop feeding conveyor diverters, case packers and filling heads, it keeps the air dry, filtered, lubricated and regulated so actuators cycle consistently through the shift.
Fitted on the air inlet of CNC machines and machining centres, it conditions the supply to tool changers, clamps and air bearings, with the psi gauge giving operators a direct pressure readout.
The GC400-10 sits at the size 400 step of the GC range with NPT3/8 ports; step up or down (200/300/400/600) to match the port and flow path of the machine it feeds. Drain type is a real choice: automatic drain (fitted here) empties the bowl without operator attention, while manual and differential-pressure drains suit attended or duty-based setups. The filter element is 40 um standard; specify the W code for 5 um where finer filtration is needed. This unit is the low-pressure type, so confirm your working pressure band before ordering.
Gauge style and scale are decodable options: an embedded square gauge is standard, an external round gauge is optional, and scales are MPa, psi or bar (this unit carries a round psi gauge). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow for the series is published as curves, not a single rating, so ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number. Tell us your application and line conditions and we will confirm the flow and sizing from the datasheet on request before you order.
The L in the code GC40010ALC2T marks the low-pressure regulator type, intended for circuits working below the standard pressure band; the exact adjustment range for this type is not published, so confirm it with us. The A marks an automatic drain, which expels collected condensate from the filter bowl by itself instead of waiting for a manual drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.