
The AirTAC GC400-10 FRL Unit (GC40010ALNT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC40010ALNT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator built up as one 400-size set on NPT 3/8-inch ports. In use it removes water and particulate from the compressed air with the standard 40 um element, sets the downstream working pressure, and meters oil mist to the actuators and tools that follow. This code carries the automatic-drain filter bowl (A), the low-pressure regulator type (L) and no gauge (N); the filter and lubricator bowls are polycarbonate at size 400. The medium is compressed air only, maximum working pressure is 1.0 MPa (145 psi), and operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part sold by a US distributor. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow for the series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing on request.
| Model | AirTAC GC400-10 FRL Unit (GC40010ALNT) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, lubricated, pressure-set air to the quarter-turn actuators driving butterfly valves on a treatment-plant skid, with the automatic drain keeping the filter bowl clear during unattended operation.
Supplies the sealing and flap-fold cylinders on an end-of-line packaging machine, combining water removal, pressure setting and oil mist in one 3/8-inch set.
Powers the diverter gates that push parcels between conveyor runs in a sorting hub, where the low-pressure regulator type matches the gate cylinders' working span.
Choose the 400 size when 3/8-inch supply piping is already in the line; lighter demand can drop to size 300 and heavier lines step to 600. Because flow is published as curves, not a single rating, we confirm sizing against your air consumption before you order. The automatic drain here (A) empties the filter bowl unattended; manual (M) and differential-pressure (blank) versions are orderable alternatives. The element grade is the standard 40 um (W gives 5 um), and the L in this code selects the low-pressure regulator type - confirm its adjustment range with us on request. No gauge is fitted (N), though gauge options can be specified in the code; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for the GC series as characteristic curves across pressure ranges, not as a single rated figure, so no one number is honest to quote. Send us your working pressure and air consumption and we will confirm the flow and full datasheet on request before you order.
A selects the automatic drain, which empties the filter bowl without daily attention. The same 400-size, NPT3/8 set is also available with a manual drain (M) or the differential-pressure drain (blank) - just change that position in the code when you order.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.