
The AirTAC GC400-10 FRL Unit (GC40010C3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination made up of a separate air filter, pressure regulator and oil-mist lubricator. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 with three thread types (NPT on this code), 40 um or 5 um filtration, and MPa, psi or bar gauge scales. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow figures appear in the catalogue as curves rather than a single rating, so we will confirm sizing and datasheet data on request. Order code GC40010C3T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC400-10 FRL Unit (GC40010C3T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Condition the air feeding core-pull valves and ejector circuits on an injection molding machine, with bar-scale gauge readings matching the plant's European instrument standard.
Supply the stopper gates and lane-divert cylinders along a bottling conveyor's transport section from one filter-regulator-lubricator set sized on 3/8 in NPT piping.
Run the pneumatic controls of a dock leveler and trailer restraint station, with the separate lubricator keeping actuator cylinders oiled in a dusty loading-bay environment.
Size 400 at 3/8 in NPT covers medium-flow machine supply circuits; compare sizes 300 and 600 if your duty sits near a flow boundary. The standard 40 um element suits general machine-air duty, while 5 um (W) codes serve finer-protection needs. The round gauge here reads in bar; MPa and psi scales, and square-gauge versions, are on other codes.
Thread is three thread types (NPT on this code). The filter bowl is polycarbonate at this size with differential-pressure drain. Because flow is published only as curves, ask us to check your application against the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes G-series flow as performance curves rather than one rated figure, so we do not quote a number here. Share your application details and we will confirm the sizing from the datasheet on request.
C selects the external round pressure gauge and 3 selects the bar scale. If you prefer readings in MPa or psi, the equivalent codes C1 or C2 apply, and square-gauge versions are available in the same series.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.