
The AirTAC GC600-20 FRL Unit (GC60020AF1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60020AF1TK is a three-unit F.R.L. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. This version keeps the standard 40 um filtration grade for general plant air, uses the automatic drain so condensate leaves the aluminium alloy bowl unattended, and carries the K code for a fitted reverse (check) valve that helps hold downstream pressure if supply is interrupted. The square embedded gauge reads in MPa.
This is a genuine AirTAC part from the G series, offered in sizes 200, 300, 400 and 600, ports from 1/8 in to 1 in, three thread types (NPT on this code), differential-pressure, automatic or manual drains, and 40 um or 5 um elements. Flow is published as curves, not a single rating - we confirm datasheet figures on request.
| Model | AirTAC GC600-20 FRL Unit (GC60020AF1TK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Supplying actuated butterfly and gate valves across a water treatment train, where the check valve supports pressure retention and the 40 um grade suits general-duty valve actuators.
Conditioning air for core pulls, air valves and ejection functions on injection molding machines, with the automatic drain keeping condensate out of the header through long production runs.
Feeding belt take-up cylinders and chute actuators at a quarry conveyor transfer point, where a single regulated 3/4 in header serves several duty points in dusty conditions.
This is the large-flow G series set with the standard 40 um element - the right grade for general pneumatic tools, cylinders and valves where 5 um fine filtration is not required (the W-coded versions cover that need). The square MPa gauge is embedded in the regulator rather than the external round style, and the K check valve is fitted for pressure retention. If your circuit does not need that, choose the same unit without the K. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G and NPT are ordered options.
Because AirTAC publishes flow only as curves, no rated flow figure is stated here. Give us your application parameters and we will confirm sizing and datasheet values on request before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC states flow performance as curves across the pressure range, not as one rated figure, so there is no single number to quote here. Send us your working pressure and air demand and we will confirm the datasheet curve and correct sizing on request before you order.
F is the square embedded gauge style and 1 is the MPa scale, so the regulator reads in MPa on a square dial. The blank filter position is the standard 40 um element - the general-purpose grade for plant air - while the W-coded variants of this unit carry the finer 5 um element. Both grades are available if your application later needs finer filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.