
The AirTAC GC600-20 FRL Unit (GC60020AF3WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600 is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator piped together to condition compressed air at one station. This GC60020AF3WT is the 600 size with 3/4 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi), and with the automatic drain the regulator adjustment range is 0.15-0.9 MPa (20-130 psi).
This is a genuine AirTAC part. At the 600 size the filter bowl is aluminium alloy, and the unit is rated for -5 to 70 C (non-freezing). AirTAC's G series also covers 200, 300 and 400 sizes with manual or differential-pressure drains, 40 um or 5 um elements, other gauge scales and G or NPT threads, so a matching unit can be specified for smaller lines. Flow for this size is published as curves rather than a single rating; ask us and we will confirm the datasheet figures for your application.
| Model | AirTAC GC600-20 FRL Unit (GC60020AF3WT) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
A bottling hall's filler and capper actuators run continuously and generate condensate; this 5 um, automatic-drain station filters, regulates and lubricates the air feeding the line without an operator having to drain bowls each shift.
Supplies filtered, regulated and lubricated air to pneumatic clamps and tool-change cylinders on a machining centre, with the bar-scale gauge giving a quick visual check of the setpoint.
On a case packer or palletizer, the three separate units let maintenance service the filter, adjust the regulator and top up the lubricator independently instead of replacing a complete set.
The 600 size carries the largest ports in the G series: 3/4 in. (code 20) or 1 in. (code 25), while the 200/300/400 sizes cover 1/8 to 1/2 in. Match the port to your piping and let flow decide, not guesswork. Drain type is a real choice here: automatic (this unit, code A) expels condensate on its own, manual (M) needs an operator, and the blank default is a differential-pressure drain. Filter grade is 5 um on this version; the standard element is 40 um if your application tolerates coarser filtration. Gauge is a square type with a bar scale; MPa, psi scales and a round external gauge are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published by AirTAC as curves, not a single rated number, so send us your flow and pressure requirement and we will confirm the datasheet curve and correct size before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote a number here. Send us your flow and pressure requirement and we will confirm the datasheet curve for this 3/4 in. size before you order.
A means the filter bowl drains automatically, so condensate is expelled without an operator; the catalogue alternatives are M (manual) and blank (differential-pressure), and the drain type also sets the regulator adjustment range, which is 0.15-0.9 MPa (20-130 psi) for this automatic-drain version. W means the 5 um filter element instead of the standard 40 um.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.