
The AirTAC GC600-20 FRL Unit (GC60020ANT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600 is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled to condition compressed air at one station. This GC60020ANT is the 600 size with 3/4 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi), and with the automatic drain the regulator adjustment range is 0.15-0.9 MPa (20-130 psi).
This is a genuine AirTAC part. At the 600 size the filter bowl is aluminium alloy, and the unit is rated for -5 to 70 C (non-freezing). Variants in the same series add a square or round gauge with MPa, psi or bar scales, a 5 um element, manual or differential-pressure drains, and G or NPT threads. Flow is published as curves rather than a single rating; ask us and we will confirm the datasheet figures for your application.
| Model | AirTAC GC600-20 FRL Unit (GC60020ANT) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
A general machine-shop drop feeding pneumatic tools and fixtures: 40 um filtration, automatic draining and oil mist, with pressure read from an indicator mounted further along the line rather than on the set.
Impact wrenches, air ratchets and lifts in a service bay need lubricated air; this 3/4 in. station conditions the drop that feeds the bay reels, and drains itself between jobs.
Feeds pick-and-place cylinders and clamps on an assembly station whose control panel already carries its own pressure indication, so the set is ordered without a gauge.
The 600 size carries the largest ports in the G series: 3/4 in. (code 20) or 1 in. (code 25), while the 200/300/400 sizes cover 1/8 to 1/2 in. This version uses the standard 40 um element; choose the W suffix for 5 um filtration if the downstream equipment needs it. Drain type is automatic here (code A); manual (M) and differential-pressure (blank) are the alternatives, and the drain type sets the regulator adjustment range. Gauge is omitted on this unit (code N), so rely on downstream indication or order a gauge variant. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published by AirTAC as curves, not a single rated number, so send us your flow and pressure requirement and we will confirm the datasheet curve and correct size before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote a number here. Send us your flow and pressure requirement and we will confirm the datasheet curve for this 3/4 in. size before you order.
The suffix N means the unit is supplied without a pressure gauge. Other versions in the series carry a square or round gauge with MPa, psi or bar scales; if you want local pressure indication at the set, specify one of those variants instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.