
The AirTAC GC600-20 FRL Unit (GC60020C1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600 is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator piped together to condition compressed air at one station. This GC60020C1T is the 600 size with 3/4 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi), and with the differential-pressure drain the regulator adjustment range is 0.15-0.9 MPa (20-130 psi).
This is a genuine AirTAC part. At the 600 size the filter bowl is aluminium alloy, and the unit is rated for -5 to 70 C (non-freezing). The series also offers automatic or manual drains, a 5 um element, square gauges and psi or bar scales, a reverse-valve option, and G or NPT threads. Flow is published as curves rather than a single rating; ask us and we will confirm the datasheet figures for your application.
| Model | AirTAC GC600-20 FRL Unit (GC60020C1T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Water and wastewater plants run quarter-turn valves on pneumatic actuators; this station filters, regulates and lubricates the air feeding the valve solenoids and positioners, with the round MPa gauge for local checking at the skid.
Snack-food and carton packing machines cycle thousands of strokes per shift and depend on steady, lubricated air; the MPa gauge lets operators verify the setpoint at a glance during changeover.
In an automotive body shop, weld fixtures clamp on shop air; the separate filter, regulator and lubricator keep the clamp circuit conditioned through two-shift running, and each part can be serviced on its own.
The 600 size carries the largest ports in the G series: 3/4 in. (code 20) or 1 in. (code 25), while the 200/300/400 sizes cover 1/8 to 1/2 in. Drain on this unit is the blank default, a differential-pressure drain; automatic (A) and manual (M) are the alternatives and the choice sets the regulator adjustment range. Element grade is the standard 40 um; add W for 5 um if finer filtration is needed. Gauge is a round external type with an MPa scale; square gauges and psi or bar scales are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published by AirTAC as curves, not a single rated number, so send us your flow and pressure requirement and we will confirm the datasheet curve and correct size before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote a number here. Send us your flow and pressure requirement and we will confirm the datasheet curve for this 3/4 in. size before you order.
C is a round external gauge and 1 sets its scale to MPa. The drain position is blank, which means the filter bowl uses the default differential-pressure drain, and the regulator adjustment range with this drain is 0.15-0.9 MPa (20-130 psi).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.