
The AirTAC GC600-20 FRL Unit (GC60020C1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC60020C1WTK is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator for 3/4 in (NPT) compressed-air circuits. The K code adds a reverse (check) valve to the unit, the W code specifies 5 um filtration, the C1 gauge code provides a round pressure gauge reading in MPa, and the blank drain position is the differential-pressure type. The 600-size bowls are aluminium alloy.
This is a genuine AirTAC part from the GC600 series, rated at 1.0 MPa (145 psi) maximum working pressure with a -5 to 70 C operating range. The regulator adjustment range with differential-pressure drain is 0.15-0.9 MPa (20-130 psi). AirTAC publishes flow as performance curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
| Model | AirTAC GC600-20 FRL Unit (GC60020C1WTK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
A check-valved F.R.L. on the 3/4 in supply to a clamping press, where the reverse valve is coded into the circuit to suit the customer's standard print.
Conditioned 3/4 in air feeding diverter gates and stopper cylinders across a sorting conveyor, with 5 um filtration protecting the direction-control valves.
Filtered, regulated and lubricated air for loom pneumatics in a weaving shed, where the K code matches the reverse-valve arrangement specified on the machine build.
This GC600 code is specified by: 5 um filtration (W), a round MPa gauge (C1) and a reverse (check) valve (K), all on a 3/4 in NPT port. If the check valve is not required for your circuit, the non-K variant of the same configuration is available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Choose the size step (200 to 600) against the flow your circuit needs; since G-series flow is published as curves rather than one rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC does not publish a single rated flow figure for G-series units; flow is given as performance curves. Tell us your working pressure and consumption and we will confirm the correct size from the datasheet on request.
K indicates that a reverse (check) valve is fitted on this unit; without the K the same GC600 configuration is supplied without it. Everything else in this code decodes as 5 um filtration, a round MPa gauge, differential-pressure drain and a 3/4 in NPT port. We can confirm the exact variant you need before ordering.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.