
The AirTAC GC600-20 FRL Unit (GC60020F1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: separate filter, regulator and lubricator units conditioning compressed air in one line. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The trailing K means a reverse (check) valve is fitted in this configuration, blocking reverse flow through the set. With the differential-pressure drain, the regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi). Maximum working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), the medium is compressed air only, and at the 600 size the filter bowl is aluminium alloy.
This is a genuine AirTAC part. The same three-unit set is available in sizes 200, 300, 400 and 600, with and without the check valve, in different drain, filter-grade and gauge versions. Flow for the series is published as performance curves rather than a single rated figure; we confirm the datasheet and flow data for this model on request. Order code GC60020F1TK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC600-20 FRL Unit (GC60020F1TK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Installed on a branch off the compressor room header; the fitted reverse/check valve blocks backflow through the set when an upstream compressor unloads or a branch is taken out of service.
Feeds the shop's air tools and lift cylinders from the main drop, with the check valve holding the conditioned side when the shop compressor is shut down between shifts.
Runs the diverter gates and stopper cylinders along a canning conveyor, where the check valve helps keep downstream pressure stable on the gated sections of the line.
Decode the choices: this is a 600 with a 3/4 in NPT connection and a fitted reverse/check valve (K) - if your circuit does not need backflow prevention, the identical set without it is the GC60020F1. Drain is the standard differential-pressure type here; automatic and manual drain versions are separate codes. Filter grade is the standard 40 um element; W-coded models carry the 5 um grade. Gauge is the square type scaled in MPa; round bar-scale and no-gauge options exist as separate codes. Thread is three thread types (NPT on this code).
Flow is published as curves, not one rated number, so send us your flow and pressure targets and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the G series as performance curves, not as a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet figures for the 600 / 3/4 in set before you order.
It means a reverse (check) valve is fitted in this configuration, which blocks reverse flow through the set. The same three-unit set without the check valve is coded GC60020F1, so choose the K version only where your circuit needs backflow prevention.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.